Used plastic refinery to carbon black pyrolysis machine
Basic Info
Model No.: LJ-8
Product Description
Used plastic refinery to carbon black Pyrolysis Machine
About us
Our company is located in Chenfeng Avenue, Pingtai Economical Development Zone, Shangqiu, Henan, China. It covers an area of 75,000 square meters, of which there are two modern production workshops cover an area of 60,000 square meters. Our company mainly engaged in waste rubber, waste plastics, waste tires, waste aluninum foil, waste mineral oil and other environmental pyrolysis equipment, distillation equipment and peripheral ancillary equipment processing production and sales. Company annual output is more than 400 sets of environmental protection equipment. Our products have been exported to Europe and the United States, South Africa, Southeast Asia, the Middle East and the Mainland and other 36 countries and regions.
Features of Used plastic refinery to carbon black pyrolysis machine
a. In the design of pyrolysis key device, completely overcome the local heat uneven, easy to break, low yield, short life and other unfavorable factors of the current vertical flat bottom Pyrolysis Plant.
b. With fast and practical feed and slag system.
c. Efficient gas heating system. In the process of refining, when the heated gas reaches 150 degrees Celsius, it will produce a lot of gas which can not be liquefied in normal temperature and pressure methane to butane.These gases are fully burned by specially designed gas nozzles, will produce a lot of energy which greatly saves energy.
d.Flue dust removal system has a desulfurization dust cather(qualified), equipped with two ways water impact cyclone dust removal chamber, which can ensure the discharge of flue outlet reach safe discharge standard.
Raw materials of Used plastic refinery to carbon black pyrolysis machine
Item Raw Materials Output Tyres Steel wire tyre 40%--50% Nylon tyre ≈40% Bicycle tyre ≈35% Paper pulp Coarse material ≈15% Water washing material 23%-26% PE material ≈70% Cable skin PE cable skin ≈85% PVC cable skin ≈25% Pure rubber cable skin ≈35% Telephone wire ≈50% Life Garbage Pure plastic bag ≈50% Coarse material with water ≈15% shoes Sports shoe`s sole 27%-33% Black rubber ≈35% Gum outsole ≈45% Others Common rubber pipe ≈30% Carpets ≈35% Aluminum foil ≈30% Car glass bead ≈50% PP Beverage bottle ≈50%
Working process of Used plastic refinery to carbon black pyrolysis machine
1.Feeding requires 1-2 hours. Tires less than 1.4 meters can be directly fed into the tire. Large tires need to be cut and then fed; plastics are fed by automatic feeders or conveyor belts;
2. Heating takes about 6-8 hours. Normally, oil and gas will be produced when heated to 180 degrees. At 240-260 degrees, oil and gas will be produced in large quantities.
3. Cooling, oil and gas condenses into fuel oil through the cooling system;
4. During the pyrolysis and recovery of exhaust gas, in addition to oil and gas, some flammable but non-condensable gases will be generated. We call this [exhaust gas." This gas can be directly recovered for heating the pyrolysis reactor to save energy. fuel;
5. Carbon black and steel wire slagging, the end of the cracking process, oil and gas out of the reactor, the need to discharge the reactor inside the residual material, to carry out a new cracking process, these residues mainly include carbon black and steel wire used to make tire plastic.
Working process of Used plastic refinery to carbon black pyrolysis machine
1.Feeding requires 1-2 hours. Tires less than 1.4 meters can be directly fed into the tire. Large tires need to be cut and then fed; plastics are fed by automatic feeders or conveyor belts;
2. Heating takes about 6-8 hours. Normally, oil and gas will be produced when heated to 180 degrees. At 240-260 degrees, oil and gas will be produced in large quantities.
3. Cooling, oil and gas condenses into fuel oil through the cooling system;
4. During the pyrolysis and recovery of exhaust gas, in addition to oil and gas, some flammable but non-condensable gases will be generated. We call this [exhaust gas." This gas can be directly recovered for heating the pyrolysis reactor to save energy. fuel;
5. Carbon black and steel wire slagging, the end of the cracking process, oil and gas out of the reactor, the need to discharge the reactor inside the residual material, to carry out a new cracking process, these residues mainly include carbon black and steel wire used to make tire plastic.
Technical parameter of Used plastic refinery to carbon black pyrolysis machine
| Model | Raw material | Structure form | Cooling system |
| LJ-8 | Waste tire, plastic, rubber | Horizontal | Water cooling |
| Heating method | Oil output rate | Power | Installation |
| Directly | 45% | 15.5KW | Foundation |
| 24 hours processing capacity | 24 hours oil output | Work pressure | Host speed |
| 6-8 tons raw materials | 2.5-3.2 tons fuel oil | Atmospheric | 0.4r\min |
| Transport | Reactor size | Working form | Weight of reactor |
| External gear drive | 2200*6000mm | Batch | 28 tons |
End product of Used plastic refinery to carbon black pyrolysis machine
Name Percentage Usage Tyre oil 40%~45% * can be sold directly as fuel. * can be refine to diesel and gasoline by oil Distillation plant Carbon black 37% * can be sold directly. * can be refined by carbon black processing machine to make it finer (1500mesh finer). *can be made into pellet by pellet machine Steel wire 13% *can be sold directly as steel or iron. Waste gas 5% * can be recycled to heat up the reactor
Product Categories : Waste Plastic Pyrolysis Plant